Cartridge Filters & Filter Element
BSCF Single Cartridge Filter
where to buy equipment assistance
*Stock may differ from store to store
Premium quality above ground pool with Italian styling and finish. Looks more like high end outdoor furniture than a modular pool. High strength PVC liner secured over hot galvanized coated steel structure. Finish of UV resistant wicker exterior panels with composite wood top edge. Supplied as complete pool kit.
Please check with your local regulations for above ground swimming pools: NSW/QLD/VIC/SA/WA/NZ
Membrane
The liners used on Dolce Vita pools are made from a high strength polyester & polymer membrane and subsequently UV treated with special additives to slow the aging of the material. The membrane is resistant to 430 Kg / cm 5. according to DIN 53354.
Composite Wood Coping
All pools are supplied with a durable composite "eco-wood" top edge coping. Not only it is environmentally friendly and aesthetically pleasing, it is also extremely low maintenance.
Panels in Synthetic Woven Fiber
The unique wicker paneling which forms that external face of the DolceVita pool is constructed from an aesthetically pleasing, durable synthetic fiber with practically zero maintenance required. Available in coffee or light grey colouring with a matching top edge coping.
Pool Safety Ladder & Steps
Supplied with a sturdy stainless steel ladder which attaches directly to the structure, giving it greater stability than other above ground pools. Also supplied with stainless steel internal steps. The exterior ladder can be also raised when required. Please note: a pool fence meeting Australian Standards must be installed with this pool.
Solid Durable Structure
Vertical structural uprights are made from hot galvanized steel with stainless steel fee. The horizontal support structure is hot galvanized steel. All nuts and bots are anti-slip stainless steel.
Model No. | Dolcevita Rattan (Grey) |
---|---|
Pool Coverage | |
Volume of water | 2M wide x 4M long x 1.2M deep (volume 9.6m3) |
Size of structure | 2.4M wide x 4.4M length x 1.3M height |
Installation | Recommended to be installed on a concrete slab or an even and clean paved area. |
Equipment | |
Equipment | Supplied with 0.5hp Baracuda pump, 50 sq ft Baracuda cartridge filter, LED light, stainless steel safety ladder, pool cleaner and floating skimmer. |
Content of Pool Kit | White LED light with transformer, suction cleaner with 7M hose Skimmer kit, composite wood top edge, stainless steel hardware & fixings, hot galvanised steel support structure |
The DOLCEVITA is a modular structure swimming pool made with prefabricated elements designed to be assembled on site. You have two options when it comes to the installation. You can either apply for an owner builder’s licence and attempt to do the installation yourself or you can reach out to our Customer Care Team at 1300 784 423 for recommendations on an approved installation service provider in your State. These installation service providers can normally also assist you submit your CDC or DA for your pool to council. The installation of a Dolce Vita Rattan pool will generally take 2 experienced installers 2 full days to complete. Please refer to the Owner's Manual for more information.
Certification/council approval is required for any pool in Australia prior to building a pool. The required documentation can be submitted to your local council either by yourself or a private certifier. The process takes anywhere between 4-8 weeks to complete. You must also comply with each state’s pool fencing requirements in your area to avoid penalties. Based on the regulation in AS 1926.1 (Safety Barriers for Swimming Pools), all DOLCEVITA pools come with a pre-fitted warning sign that must not be removed.
The DOLCEVITA must be positioned on a surface suitable for supporting the weight of the water and the structure of the pool itself (approx. 20,000kgs for a 5x3 and 10,000kgs for a 4x2). The surface must be level and free from debris. Ideally, the pool should be installed on a structurally sound concrete slab.
The pool filtration (pump and filter) and its power supply must be placed at a distance of at least 3.5M away from the inside edge of the pool. The pool will need a 10Amp socket with 2 x power outlets. These power points should be located at least 3.5M distance from the pool wall. The whole system needs to be equipotentially bonded / earthed. For more information speak to your licensed electrician to discuss the AS3000-2018 Australian Standards for swimming pool installations.
Once the full install is complete, your certifier or builder will need to issue an occupation certificate prior to filling the pool. You might also need to register your pool based on the state regulation. Once you start up the system and make sure your pool is chemically balanced, it is ready for swimming! Don’t forget to register your DOLCEVITA on our Warranty page.
Related products
Cartridge Filters & Filter Element
BSCF Single Cartridge Filter
Laghetto Dolcevita Rattan (Coffee)